Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2012 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

M46 Transmission Vent 200

posted by  johnbarry on  Wed Feb 13 17:30 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Sep 10 08:38 CST 2001
[RELATED]

I recently checked my fluid level in my 1980 volvo manual transmission. It was at least 1 qt low. Upon close inspection from underneath, I noticed a hole about 1/4" to 3/8" size in the side of the housing up near the top on the driver's side. Is this a vent opening? It sure didn't look like it was supposed to be there. It looks like a large bubble that was in the casting. I need to know if I should try to block this hole or if it has a function.

Thanks,

John
Seattle WA
jpb16@alumni.cwru.edu
245 DL






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New M46 Transmission Vent [200]
posted by  johnbarry subscriber  on Wed Feb 13 17:30 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.