Greetings all -

Last weekend I ended up rebuilding the passenger side motor mount on my '82 245DL. Unfortunately, the old mount had sheared off the upper forward and lower rear bolts in the block. The rear one came out with an Easy Out, but the front bolt bent one Easy Out and sheared off another one completely - leaving it firmly stuck inside.

So my question is this: I've noticed that there are four bolt holes on the side of my 2.1L that could be used for motor mounts, but the stock motor mounts only utilize three of the four. Are there any heavy duty aftermarket mounts that would use all four bolt holes? This way I could use three of the four, as I am in no hurry to pull the motor to try to get the Easy Out unstuck from the block.

Any ideas? Thanks in advance.