Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Kickdown cable adjustment 200 1993

posted by  hip82 on  Sun Mar 17 09:36 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Jul 12 10:12 CST 2001
[RELATED]

'93 245 with auto trans

Having some delayed shifting from 2 to 3 and 3 to OD.
Checked fluid level. Was a little high, now in band. Fluid is good, ~4 months old.

Trying to adjust kickdown cable. Noticed that there is no cable stop crimped onto the cable. Not sure if this is necessary to adjust properly. Seems to me either it is, or perhaps it's just a reference.

Does the metal cable sheath with the two nuts press against this crimp? Bentley's shows up to a 1mm gap at with a slack throttle.

What to do now?

Thanks,

Tom






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Kickdown cable adjustment [200][1993]
posted by  hip82 subscriber  on Sun Mar 17 09:36 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.