Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Needing interior parts for a refurbishing 200 1987

posted by  dannyfixit on  Tue Mar 26 06:17 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Jun 13 09:41 CST 2011
[RELATED]

Starting to restore my 87 245GL wagon. Know of most all the major part suppliers for lots of stuff, but not finding a couple items on those sites nor on eBay. Wonder if anyone has seen someone supplying these: (any color will do)

- Plastic trim surround for an automatic shift console. (not the brake console)
- front door panels or the fiberboard foundation.

For the door panels, I planned to re-cover them, but the driver's door one is rotted from water damage. Seen a plastic one from one supplier, but for a DL that has crank windows, which I don't have. Something like that would work as I could apply my covering over it, possibly.

Barring hunting junk yards for panels, any other handy folks out there have ideas on forming my own fiberboard/cardboard foundation for one of these?

This thing is going to look absolutely fabulous when it is done!

Thanks all ahead of time.
--
94 Red 850 Turbo wagon, 87 245GL, 74 144






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Needing interior parts for a refurbishing [200][1987]
posted by  dannyfixit  on Tue Mar 26 06:17 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.