Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2004 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Rear caliper questions, piston diameter? 900 1993

posted by  wongg3 on  Thu Mar 28 14:12 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Oct 21 20:12 CST 2014
[RELATED]

Hi all, the car in question here is a 93 944T, my girlfriend's car. ABS, no IRS. The left rear caliper has a seized piston, and I want to get a rebuilt unit.

The calipers on the car have no clear markings. There is a 3, but nothing after that. I measured the pistons to be 34mm diameter. This was the exposed portion of the piston. I don't know if it has a greater diameter where it goes into the bore. The pistons have straight sides, right?

I called up Autozone and they asked me if they were 38 or 40mm pistons.

The IPD catalog shows a 34mm piston for 760, but only up to 92. They don't even list any rear calipers for the 940. RPR shows just one part for the 93 940, but they don't say what diameter it is.

What is it supposed to be??? I searched the archives and I found 2 other posts that asked similar questions, but neither one had any replies. I hope this one doesn't get the same fate!

Thanks for any help!
Greg Wong






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Rear caliper questions, piston diameter? [900][1993]
posted by  wongg3  on Thu Mar 28 14:12 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.