Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2015 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

B230FT 90° oil filter adapter...will it fit the B21FT? 200 1981

posted by  someone claiming to be Leon Phelps on  Tue Apr 9 11:16 CST 2002 [RELATED]

Hello everyone...

I was just wondering if anyone here has retrofit the 90° oil filter adapter from a B230FT to a B21FT. I'm sure that the adapter itself will fit, but I don't know for sure how to attach it to the B21FT block. The B21FT uses a nut on a stud to secure the oil filter adapter, but this right angle fitting from the B230FT uses a banjo bolt. Is there any way to adapt this? Thanks in advance for any help.

P.S. - Has anyone had any trouble fitting the oil cooler in after the intercooler conversion? Does the intercooler require a different oil cooler, because my cooler just didn't want to fit after the conversion. It is still very tight in there and it just doesn't seem right. If anyone can address this issue and maybe tell me what might be wrong, I would really appreciate it. Thanks!





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New B230FT 90° oil filter adapter...will it fit the B21FT? [200][1981]
posted by  someone claiming to be Leon Phelps  on Tue Apr 9 11:16 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.