Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2002 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Need a bell housing for a 1990 745 GLE 16 valve with M46 tranny 700

posted by  garlandw on  Fri Apr 12 08:42 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Sep 10 08:58 CST 2014
[RELATED]

I have posted this request in the classified forum but I suspect I will have more luck here. This is a bit urgent.

I Need a bell housing for a 1990 745 GLE 16 valve with M46 tranny. That's the 4 speed manual with the electric overdrive. The housing is for the hydraulic actuated clutch (the pivot pin is on the side nearest the lever opening). There is a speed sensor cutout at the top of the housing (so it is different than the 240 housing as far as I know). I am in the middle of a clutch job and found the bell housing is not in great shape. Some cowboy did a number on the car before I bought it. I am in Burlington, Ontario, just west of Toronto. Can anyone help me out? Local yards have come up dry so far, even Hamilton Garage which as a bit inventory. I can get a 240 housing but that does not have the speed sensor cutout.

Thanks folks,
Bill






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Need a bell housing for a 1990 745 GLE 16 valve with M46 tranny [700]
posted by  garlandw subscriber  on Fri Apr 12 08:42 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.