Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2020 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

How did you go about putting in a new radio? 900

posted by  Andrew Woods on  Sun Apr 14 12:59 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Hello. I tried 4 places today and NONE of them had a wiring harness for my 94 945T. I have the CR 814 radio and I have an AMP connector in the back and a rectangular plug. I found the amp next to my steering wheel and it also has the same connectors on it, except the colors of the wires on the rectangular connector are different.

My 91 240 had an amp and I remember getting a wiring harness that had 2 plugs. one pluged into the connector that was originally on the back of the stock radio, and the other went into the connector coming out of the amp. (There where 3 connectors on that amp, one said AMP and the other 2 where rectangular connectors, one input from the radio and one out to the speakers) The amp in my 940 dosen't have connections like that, and how did the colors of those wires change? anyway, how did you go about putting in a new radio BESIDES having the gut at the shop put it in!

P.S. I've installed about 7 radios so I should understand what you are talking about.
--
My 91 245






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New How did you go about putting in a new radio? [900]
posted by  Andrew Woods  on Sun Apr 14 12:59 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.