Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2003 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

A/C O-rings 900

posted by  torrec57 on  Wed Apr 17 12:46 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Jun 10 09:26 CST 2013
[RELATED]

For a 1996 960 any one has documentation to check if this are the correct O-rings.
Thanks
Got this info from (http://www.foreigncarpartsonline.com/)
(15.9mm for 5/8" tube) at compressor (inlet or outlet)
(12.7mm for ¼" tube) at condenser inlet (from compressor)
(12.7mm for ¼" tube) at condenser outlet (toward evaporator)
(12.7mm for ¼" tube) evaporator inlet (from condenser)
(15.9mm for 5/8" tube) at evaporator outlet (toward accumulator)
(19.05mm for ½" tube) at accumulator inlet (from evaporator)
(19.05mm for ½" tube) at accumulator outlet (toward compressor)
on expansion valve
at expansion valve
(9.52mm for 3/8" tube) between pressure sensor and condenser
--
1996 960 123,200







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.