|
Hi, Just wanted to give people some assurance if they would want to install a voltmeter in their non-turbo brick... It's like the EASIEST thing to do... I found a 87 760 turbo (i think) at the Junkyard... Pulled the voltmeter gauge out of the cluster to install in my 89 740 16v.... It's fairly easy, 2 screws and about 5 wire connections to get the cluster out, another 2 screws to remove the blank panel and install the gauge... screw in the 2 wires (fairly easy, the back of the cluster is marked v+ and v-)... and put it all back together.... voila you've got volts!.... also works for the boost gauge... grabbed that one too... don't know why.. probably just so it looks full =)
Cliff Scott
89 740 16v <-now with Volt and Boost gauges!
|