Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

temp gauge pegs high, part 2 200 1985

posted by  someone claiming to be George on  Mon May 20 02:48 CST 2002 [RELATED]

Hi Brickboard,
I have checked to see if the wire to the temperature sensor was being grounded out by the block. It was not. The wire looks bare in places, but it is not touching anything to ground it out. I disconneted the wire from the temperature sensor to see if it would change anything. With the wire disconnected, it still pegs all the way past the red zone. So, is it the temperature sensor that is faulty, or the gauge itself, or do I still need to do some more testing with the wire?
Thanks, George






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New temp gauge pegs high, part 2 [200][1985]
posted by  someone claiming to be George  on Mon May 20 02:48 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.