Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Press tool for front inner wheel bearing race 200 1983

posted by  Brick Head on  Sat May 25 19:07 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Mar 31 19:45 CST 2013
[RELATED]

I'm replacing inner and outer wheel bearings on the front of my 1983 245. I can't get the old inner race out. The Bentley manual says to use a brass drift or "press tool" to get it out. A drift(OK, a large socket)worked OK for the outer race but won't contact the inner. The local parts shops look at me like I'm nuts when I ask for a press tool to get this out. I hate to reuse the old race with a new bearing. This has to be a no-brainer but I'm stumped. Any ideas on getting this thing out or where can I get the proper press tool?
Thanks,
Curt






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Press tool for front inner wheel bearing race [200][1983]
posted by  Brick Head  on Sat May 25 19:07 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.