Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2016 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

source for oil pressure gauge sender adapter? 200 1986

posted by  philvo on  Wed May 29 11:29 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Aug 15 14:26 CST 2014
[RELATED]

I'm taking my oil pressure gauge from my '83 245GL and putting into my '86 240DL. The port in the block of the B-23 is 10mm x 1k and the port in the B-230f is 14mm x 1.5k so the sender doesn't fit.
I checked egauge.com and they had a 1/8-27 npt to 14mmx1.5k adapter but that's as close as I could get.Do they make an all metric "sender bushing"?
I'd rather spend the $3.77 for the adapter instead of the $87 for the new sender.
Thanks, Philvo
'83 245GL(parts car)
'85 245DL 209k(for sale)
'86 240 DL wagon 196k (daily driver)
'87 240DL (wife mobile)
--
philvo






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New source for oil pressure gauge sender adapter? [200][1986]
posted by  philvo subscriber  on Wed May 29 11:29 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.