Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

B21FT - Oil Change yields ZERO oil pressure. 200

posted by  Ursan on  Mon Jun 17 06:25 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Apr 18 11:38 CST 2011
[RELATED]

Yesterday I changed my oil.

Before changing, my oil gauge was at about 3 bar (out of 5). I drained
the oil, replace the filters (I have a remote dual filter setup) with a
pair of Mann filters (Part # 917W I think) Filled up with Mobil one
15/50.

Now when I cranked the car to prime the turbo I normally get at least 2
bar on the gauge, but this time I get nothing.

When I start the car both the oil light is on & I get zero on the gauge.

How is this possible?

Anyone ever encounter this? Did the oil pump just die like that?

How hard is it to replace the oil pump in the car?

Any other suggestions? Help?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New B21FT - Oil Change yields ZERO oil pressure. [200]
posted by  Ursan  on Mon Jun 17 06:25 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.