Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 3/2005 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Banjo Fitting on Fuel Filter Not Sealing.. at all!! 700 1987

posted by  matt82dl on  Wed Jul 10 08:03 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Oct 13 10:46 CST 2014
[RELATED]

Well, I decided to change my fuel filter on my day off this afternoon, Everything was going fine until I restarted and checked for leaks, the banjo fitting that connects to the pressure side of the pump is not sealing well at all... a steady drip when the car is idling. Any tips for helping it seal better. I plan to take a file to the sealing surfaces as there is a little bit of rust that has crept onto teh sealing surfaces. any other tips. What is the composition of the 2" fuel line that connects the filer to the pump, I hope I havent damaged that. your quick replies are appreciated. I need to get on the road in a few hours to pick my son up.

Thanks,

Matt





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Banjo Fitting on Fuel Filter Not Sealing.. at all!! [700][1987]
posted by  matt82dl  on Wed Jul 10 08:03 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.