Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2003 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Fade in hydraulic clutch 900

posted by  aedan on  Tue Jul 16 11:36 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

1993 940s Turbo UK spec with 4 speed + OD 125,000 miles on clock.

Towed caravan (trailer) this afternoon. Parked car for an hour or two then when I came back out to use it the clutch pedal had no pressure.

There are no leaks of fluid from master or slave and there is plenty in the reservoir.

At this point we used my wife's Fiesta to go out for dinner.

Later that evening I decided to start looking into the back of the master cylinder to see how hard it would be to pull.

However the pedal had regained pressure and was working as normal.

It looks like when the engine stopped the heat soak effect caused bubbles in the hydraulics which disappeared when the engine cooled down.

Any better ideas or should I just bleed the clutch tomorrow?

aedan







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.