Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 12/2012 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

A/C PC board solder job this W/E Any PIX out there?? 700 1991

posted by  D.P. on  Fri Jul 19 01:57 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Removing the PC board to solder any cracks I can find. Got the procedure visualized from the archives and FAQ. Now I need pictures and a lot of luck. Dash is pulled apart. Have the radio in the back seat. Everything else in the front passenger floorboard except the screws which are duck taped to the center console. Jumping the low pressure switch no longer engages the compressor clutch. Have not been running the A/C this way, just wanted to get into a wait and see mode before I fixed a symptom of intermittent A/C vs. the root cause.

If I fry the board, oh well!! The job needs to get done as no A/C in this heatwave is causing my dry cleaning bills to eat into my IPD sway bar allowance!!

No computer shop here will touch it. I found a replacement vendor named Southwest Auto that has rebuilts for $175 plus my core. Beats the dealer by a country mile!!

Will post results.
--
Regards,

David
1991 744 NA 139+K Miles





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New A/C PC board solder job this W/E Any PIX out there?? [700][1991]
posted by  D.P.  on Fri Jul 19 01:57 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.