Volvo RWD 900 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 5/2005 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

a center bearing and the rubber support problem 900

posted by  92-960 on  Tue Jul 30 15:10 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

On line I ordered a center bearing and the rubber support for a 92-960 with a 2 inch diam drive shaft. I am not sure I received the right part. The inner diameter on the bearing I received is 1.75 inches. Does the bearing sit on seat that is smaller than the shaft or is it supposed to sit right on the 2 inch shaft? I was expecting a bearing with a 2 inch inner diameter. Is this the right part? I don’t want to take the drive line apart just to find out I have the wrong part.

Thank you.






<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.