Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2005 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Oil Return Pipe O-Ring Update -- & a source for the O-Ring? 700 1987

posted by  matt82dl on  Wed Jul 31 16:04 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Oct 13 10:46 CST 2014
[RELATED]

Boy I sure manhandled that O-Ring. I managed to remove the two bolts holding the pipe to the turbo -- major PITA, then I disconnected the E-clip on the wastegate actuator rod, and unbolted the actuator. The pipe came free very easily but I only had 1/2 an O-ring. I found the other half of the O-Ring in the Bottom of the oil pan, I managed to fish it out after draining the oil. I guess I learned the hard way that the O-Ring should be placed on the tube first, not set in the block. Now, I need a source for that little bugger and the upper gasket as well. Does anyone know whoe stocks them. I wasnt able to find them @ FCP or thepartsbin.com.


Thanks,
Matt

--
'82 240 - 144k; '87 760T 133k







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.