Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2009 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Wire harness, now what else to do in addition? 200 1987

posted by  Kraynek at home on  Mon Aug 12 04:04 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

after a glimmer of false hope at the boneyard yesterday (found an 89, opened the hood, and the engine was pushed back in the engine compartment, harness cut), i'm going to order a semi-new harness from dave barton. the intake manifold will probably come off, so here's my question. what else should i do while it's off. here's my short list:
1) new seals on the intake manifold
2) remove and clean throttle body (thorough this time!!)
3) remove and clean CIS motor
4) clean/fix flame trap, housing
5) replace PCV oil trap with new one i bought a year ago.

any other ideas?
we'll also be doing the water pump and timing belt. i have a week (work begins sunday), so i'd like to order any parts today or tomorrow.
thanks for the help





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Wire harness, now what else to do in addition? [200][1987]
posted by  Kraynek at home  on Mon Aug 12 04:04 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.