Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Constant Idle Motor - can I put one from an '87 on a '90 200

posted by  someone claiming to be Bad judgment on  Fri Sep 13 05:26 CST 2002 [RELATED]

The CIS "motor" on my '90 240 is sticking, causing the engine to rev to 2000 rpm at start-up. I've sprayed P-blaster into the intake side of the beast, which has improved it so over-reving only happens after the car sits overnight. I have a good motor off an '87 240 (different part # than '90, but electrical connection looks the same). Are they interchangeable?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Constant Idle Motor - can I put one from an '87 on a '90 [200]
posted by  someone claiming to be Bad judgment  on Fri Sep 13 05:26 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.