Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Tie Rod installation 200 1991

I have a 1991 Volvo 240 that has always had a little play in the front end, but its hard to notice until you hit highway speeds (80+ mph, it has trouble tracking a straight line) or going over bumpy roads. I've taken it to a few shops, some say they can't find anything, some say the only thing they can find is a ball joint that is (a little) worn, and Goodyear claims its my right inner tie rod thats noticeably worn, and that my alignment is shifting (when I took it to have my warrantied alignment checked with an oil change). Bieng in an apartment complex, I don't have a whole lot of time or room to really do as many checks for these things on my own. I'm going to have a local shop check the inner tie rod again. What does it sound like to you all? If it is the tie rod or ball joint (or both), where would be the best place to buy one, and would I be able to replace this with simple hand tools (I would be able to drive to a house where I can do this, not my apartment parking lot)? Any links to step by step instructions would be appreciated. Thanks in advance for all your support, this board is a huge help.

Dan Dombrowski
Go Gators.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Tie Rod installation [200][1991]
posted by  someone claiming to be Dan  on Tue Sep 17 12:37 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.