Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2005 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Upgrading early Bendix front brakes to big brakes 700

I made a post some time ago regarding upgrading the small (10.25 inch diameter) Girling front brakes to the Big front brakes (11.25 inch diameter). The information is in the 700/900 FAQ along with the information on the Jumbo brake upgrade.

Today I did a little parts fitting and found that you can install the Big brakes (11.25 inch diameter front rotors) on the early 700 series which are equipped with the small (10.25 inch diameter) rotors on the front. Assuming that you already have the separate hubs and rotors with your 10.25 inch diameter front Bendix brakes, all you need are the caliper holding brackets for Bendix (Girling calipers take Girling caliper holding brackets as noted in the 700/900 FAQ) and the larger (11.25 inch diameter rotors). I would encourage anyone with the small front brakes to upgrade to the Big brakes when doing a front brake job. It is quite easy and does not involve opening the hydraulic brake lines like the installation of the Jumbo brakes on my 1987 745T.

If you don't already have the separate hubs and rotors, the separate hubs can be purchased inexpensively from a wrecking yard.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Upgrading early Bendix front brakes to big brakes [700]
posted by  john sargent subscriber  on Wed Sep 18 15:45 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.