Volvo RWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2023

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Timing Belt allignment Question --New belt

posted by  pawdrip on  Sat Sep 21 16:34 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Hi, this is the first time I've installed a timing belt and I am questioning what I did. I aligned the Cam and auxililary shaft marks with the marks on the belt cover-- no problem. What I am questioning is the mark on the crank==I think its right but I'm not sure. The belt has two white lines as marks to line up with the crank marks. I am assuming the 2 lines should line with the mark on the crank, if you could wrap it around. In other words it should line up on top of the tooth on crank. I'm not saying this well- but the others line up without counting teeth. Can anyone confirm or deny this - if you understand what I'm saying.

paw






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Timing Belt allignment Question --New belt
posted by  pawdrip  on Sat Sep 21 16:34 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.