Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2007 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

24mm Offset Box End Wrench for 240 Strut Replacement 200 1991

posted by  MrNabisco on  Sun Oct 6 15:06 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 22 12:36 CST 2014
[RELATED]


Hi!

Can anybody tell me where I can find a 24mm deep offset box end wrench to remove the strut top nuts on my 240 ????

I picked up a 15/16" Craftsman offset box end but the angle is too shallow for the tool tom get on the nut.

I've checked Stahlwille and Hazet.
The Haynes manual shows two pictures of a 24mm offset wrench in action (illustrations 3.10 and 4.3).

Anybody know who makes this kind of wrench of some other way to pop those top nuts off?

Thanks,
Bert






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 24mm Offset Box End Wrench for 240 Strut Replacement [200][1991]
posted by  MrNabisco  on Sun Oct 6 15:06 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.