Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Vacuum question 200 1983

posted by  Breadman on  Fri Oct 11 14:04 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Apr 18 04:46 CST 2012
[RELATED]

The hose coming off the flame trap to the intake manifold is oily inside, so I changed it. Also cleaned the oil seperator( Black Box) and the flame trap, cleaned out the fitting on manifold the hose attaches to. Next day the hose is loose, leaking air. The fitting is a straight nipple w\o barbs. I shouldn't put a small clamp on the hose but what to do? I can manually hold down the hose but if not, leakage. ??? Mark
--
'83 244GL 210K






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Vacuum question [200][1983]
posted by  Breadman  on Fri Oct 11 14:04 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.