Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2001 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Rough idle after MIG welding done on car floor. 200 1983

posted by  raidman on  Mon Oct 14 14:35 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Apr 4 22:17 CST 2014
[RELATED]

Had car running like a champ, took to body shop to replace floor metal behind driver's seat...shop welded on a piece of sheet metal, then layered on fiberglass and sprayed undercoating on both sides of the repair...I had asked them to undo the battery to prevent electric overload during the MIG welding. Now car idles like crap...I suspect current may have flowed up to AMM & fried it...what say you ,O Volvo Gurus?
GIA,
el raidman






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Rough idle after MIG welding done on car floor. [200][1983]
posted by  raidman  on Mon Oct 14 14:35 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.