Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2003 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Oil filter extender added to my '86 745T--Which oil cooling lines should I plug? 700 1986

posted by  bobp on  Sat Oct 19 16:11 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I have an '86 745T and picked up an oil filter extender from a wrecked '87 turbo. I'm going to add the extender to the '86.

The'86 setup has oil cooling lines leading from behind the oil filter near the engine block.

The '87 setup has oil cooling lines leading from just behind the extended filter.

The dilemma: I need to either disconnect the '86 lines and plug the holes in the '86 setup,
or
I could leave the '86 oil cooling lines in place as is, and disconnect and plug oil cooling lines in the '87 oil extender.

As I'm writing this, I think that I should remove and plug the oil cooling lines next to the engine block, since the extender piece has cooling lines coming out of it. Correct?

Thanks in advance.
--
Bob - 89 740, 86 745T






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Oil filter extender added to my '86 745T--Which oil cooling lines should I plug? [700][1986]
posted by  bobp  on Sat Oct 19 16:11 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.