Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Yakazuka vs VDO 200

Hi!

I went to a junkyard and said that I wanted a tachometer for my 80' 242DL.
He then gave me the entire speedo with the tach, as he didnt bother to dis-assemble it.

When I then came home and dis-assembled the dashboard, I noticed that the two speedo's where different.
The one I got from the junkyard was "VDO", while the original(?) was "Yakazuka".
I tried retrofitting the tach from the VDO into the Yakazuka speedo, but it doesent fit. I noticed that the light sockets are also different.
Also the VDO speedo doesent fit the "clamp" thingie on the speedo wire.

So.. Can I break off the clamp thingie? Or wont it hold itself in the speedo?

I really want to use the VDO instead, as the colors on the speedo are much nicer. It has more quality everywhere.

Also; Does anyone know where the tach wire is? I saw it went from the coil and into the torpedo wall.. Is it in one of the plugs on the speedo? I looked in the haynes manual, with no luck. I would prefer not re-wiring anothr wire unless needed.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Yakazuka vs VDO [200]
posted by  someone claiming to be DaButcher  on Mon Nov 11 22:55 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.