Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2020 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

K Jet fuel return line replacement 200 1982

posted by  runwld2 on  Tue Nov 12 02:31 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Sep 30 13:11 CST 2014
[RELATED]

1982 242 Turbo
After having replaced the in tank fuel pump, every try at reconnecting to the return fuel line has resulted in another leak when the line cracks.
I have concluded I must replace the entire metal line fromthe firewall to just over the rear axle. The original is a 5/16 metal line with flared ends connecting to 1/4 inch hose. Volvo does not sell a replacement. Their option is buying 3 meters of tubing for $45! and flaring the ends and using the stock connectors (5/16 tube to 1/4 inch hose)
I have 3 options.
1-Replace with 1/4 inch rubber hose-easiest but is it safe?

2- Replace with 1/4inch metal pre flared tube pieces (3 needed), this is used because i can only find 1/4 flared to 1/4 hose connecters, but will this be too restrictive of fuel flow?

3-Replace with 5/16 metal and Volvo flare end connectors., this option means I must flare the tube ends myself (which I must by a tool for)

Has anyone done this repair?
--
744-16v,745-16v,242Turbo.245DLT






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New K Jet fuel return line replacement [200][1982]
posted by  runwld2 subscriber  on Tue Nov 12 02:31 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.