Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2007 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Try this on your old 244 taillights 200

posted by  JoeTown244GL on  Sun Nov 17 12:02 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Oct 8 18:06 CST 2007
[RELATED]

On my 244GL I had a black plastic based right taillight and a tan plastic based left tail light due to a students inability to use a rear view mirror. Even though you could only see a little (3/8" x 12") of each color between the upper and lower lenses it still bothered me. So I bought 36" of that red-white semi-truck side marker reflective tape for $5.00. I cut out strips from the red portion and played them in between the upper and lower lenses. It solves a problem that has been bugging me for a while, it looks (ALMOST) factory applied, and it adds a little more reflectivity to the rear of my brick. Clean the surface with alcohol first. Let me know what you think if you try it.

Happy Bricking.







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.