Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Brake failure light on after brake bleed 200 1984

posted by  someone claiming to be Ratedr on  Thu Nov 21 19:08 CST 2002 [RELATED]

When I was installing my struts I bled the brakes. I decided to bleed the system also but I lapsed and forgot to check the fluid in the master cylinder. I bled the system 3 times and there's no air comming from any of the bleeder screws. The Brake failure light still stays on now everytime the car is running. Is there still air trapped in the brake system and if so how do I expel it?

Andy

84 242ti






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Brake failure light on after brake bleed [200][1984]
posted by  someone claiming to be Ratedr  on Thu Nov 21 19:08 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.