Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2016 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Flame Trap question 900

posted by  Mad Finn on  Thu Nov 28 13:26 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I have a 1991 940 GLE. I've never check or replaced the flame trap, so I bought one and went to replace it today.

When I pulled off the plastic housing (with the 2 hose connections), then the short hose the housing plugs into, I expected to see the old flame trap in the flange (that the short hose was connect to), but there was no flame trap there. What I could see in the flange was what looked like a flame trap, but with bigger holes, and it was machined into that flange.

My question is, does the 940 GLE have a flame trap and it was never installed, or was that component in the flange (which couldn't be removed by the way) the flame trap?

FYI, I bought the flame trap out of the IPD catalog, and it was listed under the 900 series, so I assumed that it was also for the 940 GLE. Was I wrong?

Thanks






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Flame Trap question [900]
posted by  Mad Finn  on Thu Nov 28 13:26 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.