Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2014 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Heater Pipe: The Saga Begins 200 1985

Well, I was able to remove the two bolts with relative ease (haha) and got the pipe to come out of the water pump. I then removed the seal, got an o ring that looked like it would work and began to reassemble. As I was finger tightening the bold through the water pump the stupid L bracked broke off the metal pipe. I have it rigged right now and it seems ok but I am not comfortable leaving it that way permanently. Has this happened to anyone else and does anyone know if I can get the pipe from someone other than Volvo? (I am not chancing it with a junker only to have it break off again.)Thanks again






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Heater Pipe: The Saga Begins [200][1985]
posted by  stxavier2003  on Sun Dec 8 03:40 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.