Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2013 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Any feedback on Tempcompboard bypass? 200 1993

posted by  Robb McC on  Mon Dec 16 07:56 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Hi all,
Was wondering if there were any out there who have performed the tempcompboard-edectomy (removing it and jumping pins 1 and 3) referenced in the Archives and what their experience was in terms of temperature gauge stability? I believe "The Don" said the gauge behaviour would be "frisky" or something like that after removing the temp comp board. I'll take any behaviour that is remotely accurate after years of cleaning, squeezing pins, etc - seems like every six months I have to take it out and then it's like clockwork, six months later the gauge starts moving around again.
Thanks,
Robb






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Any feedback on Tempcompboard bypass? [200][1993]
posted by  Robb McC  on Mon Dec 16 07:56 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.