Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

wiring necessary to add seat heaters 200 1981

posted by  old244 on  Sat Dec 21 17:36 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Jan 17 02:44 CST 2008
[RELATED]

Happy Holidays Bricksters!

Here is the latest fun - I have pulled some of the stuff needed to heat up the seats, but wanted to know what is necessary from a wiring harness standpoint. I already have the switches and the harness that goes from the switches to the four-way plug. Do I need to slit the cover on the bundle and pull out the female portion of the four way and the remaining length of wires all the way to the fuse panel? Also, how much (and where) do the wires that plug into the heater units themselves go?

TIA,
Jeff







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.