Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2002 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

How to rewire 940t horn for use when ignition is off 900 1991

posted by  Lare on  Sun Dec 22 09:43 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I'm trying to wire the horn into the alarm on my 940t and need to have const power available to the horn even when the ignition is off.

Does anyone know the color/location of the +12V wire to the horn buttons on the steering wheel? Or, even better, does anyone have a schematic for the horn system? I don't want to poke an prod too much given the proximity to the SRS system.

I've already found the horn ground [blk/blu] on the steering column. Have also located the wiring at the fuse#15 but I don't want to mess around at the fuse panel as it seems the wipers are wired into the same circuit.

Any info appreciated.

Lare






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New How to rewire 940t horn for use when ignition is off [900][1991]
posted by  Lare  on Sun Dec 22 09:43 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.