Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2007 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Big timing headache rescue needed, please 200 1979

posted by  pierre on  Tue Jan 7 08:44 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 10 10:49 CST 2014
[RELATED]

Hello and a happy new year 2003 to all...

I had the head milled approximately .070" on my B21F engine.

I install the head.

I advance the cam gear one tooth because that is how much advance I want my K cam to have. I put the timing belt on crank, intermediate and cam gears perfectly aligned. I mark the belt with "liquid paper". I turn, turn, turn the crank by hand watching for the blessed moment when all the markings will show up again in their initial perfect alignment.

After turning the crank for five minutes, still no sign of the said perfect alignment.

I HAVE to get the timing perfect because, in the event of a mistake, that modified B21F will turn into a big paperweight.

What am I completely missing here, please?

Almost infinite thanks, in advance, for any and all help...






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Big timing headache rescue needed, please [200][1979]
posted by  pierre  on Tue Jan 7 08:44 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.