Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Temp Gauge and loose spring 200

posted by  sdol on  Sat Jan 25 13:44 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Hi all

I am trying to get my temp gauge working on my 1988 240 DL sedan. I removed the instrument cluster and cleaned the connections on the comp board. On the engine block I tried grounding the wire connector to the temp sensor but I can't get the gauge to move. When I had the instrument cluster out a small spring fell out. Could this go to the temp gauge and be the reason it does not work? Any ideas? Can I put a temp gauge out of a salvage instrument cluster? If so does it require any soldering ?

Thanks Steve






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Temp Gauge and loose spring [200]
posted by  sdol  on Sat Jan 25 13:44 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.