Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 9/2019 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Where to obtain brake caliper bushings to rebuild Girling calipers? 700 1989

posted by  raidman on  Thu Jan 30 16:27 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Apr 4 22:17 CST 2014
[RELATED]

FINALLY!! I tracked down the annoying rattling from the front end..it was not the brake pad springs being broken, it was not the dust shield...it is the actual Girling caliper!
I have recently replaced the sliding bolts with a kit from FCPGroton and have installed new PBR pads. All bushings also replaced with urethane ones.
Upon putting the car up on a lift and knocking on the tire yet holding onto the caliper with my hand, the rattling stopped. I can actually jiggle the caliper on its mount.
Refering to the Volvo OEM (green) Brake service manual, it shows some bushings that the sliding bolts ride in...but where to get these except the dealer?? Could someone give me the dimensions so my friendly machine shop operator can turn two of these brass(?)bushings..
GIA,
el raidman






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Where to obtain brake caliper bushings to rebuild Girling calipers? [700][1989]
posted by  raidman  on Thu Jan 30 16:27 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.