Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2006 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Turbo timer / Ignition wire help. Please advice 700

posted by  JODICIOUS on  Sat Feb 8 07:12 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Hey Guys. I just installed me heater core (What a PITA) ad figured while I have my interior apart, why not install my Apexi turbo timer that has been sitting around for 6 months. My question is this.

The turbo timer says to splice into the power wire, and the 2 ignition wires (IG1 and IG2) behind the key ignition. Looking behind the dash, I found 7 wires. They are:

(2) Red - thick wire
(2) Light Blue/Yellow - Medium Thickness
(1) Light Blue/Red - Medium Thickness
(1) Pink - Medium Thickness
(1) Yellow/white - Thin wire

I assume either of the red wires will work for power, but am I correct to assume that the (2) Light blue/yellow are the 2 ignition wires that I need to splice into? Anyone who knows what each of these wires are or with turbo timer install experience, please help. Thanks in advance






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Turbo timer / Ignition wire help. Please advice [700]
posted by  JODICIOUS  on Sat Feb 8 07:12 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.