Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2012 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Volvo Tools Questions 200

posted by  DougC on  Sun Feb 9 06:08 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Aug 10 08:30 CST 2014
[RELATED]

Volvo Tool Questions:

Tool # 5034: According to Bentley (214-4; 216-8,9,10) this tool will hold, one at a time, the cam, intermediate, and crank sprockets while you loosen or tighten the bolt that holds them. Is this true? If it's true, for which engines? Looking at the sprockets on my B21, it doesn't seem like the same tool would work for all three. Has anyone used this tool? Cost?

Tool # 5284: Tool to hold crank while loosening crank bolt on B230. Will this same tool work on the B21, or any other Volvo engines? If it won't, what is the best tool to hold the crank pulley on the B21 while loosening the crank bolt? This bolt calls for 122 foot pounds of torque when installed.
--
Thanks to everyone for the help, Doug C. 81 242 Brick Off Blocks, stock; 86 240, 129K






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Volvo Tools Questions [200]
posted by  DougC  on Sun Feb 9 06:08 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.