Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2002 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Adding IPD bars, end link question 700 1988

posted by  Erwin on  Thu Feb 13 09:33 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 10:39 CST 2014
[RELATED]

For Valentine's day my wife funded my purchase of IPD swaybars for my '88 745t. Glad I bought her that ring for Christmas! I've downloaded the instructions from their website and have a question about the end links on the car. I've seen advertised solid links that eliminate the lower bushing at the control arm. At that point there's a heim type joint there the bolt goes through. At the other end you have the two bushings and nut that hold the swaybar.

Any real advantage to this setup? Or is it a "track day" improvement you won't notice on the street? I haven't inspected the links on my car to see if the lower bushing needs replacement. They're probably cheaper than the $75 for the solid units.

Thanks,
--
Erwin in Memphis, '88 745t 183,000 miles, '95 855t For Sale






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Adding IPD bars, end link question [700][1988]
posted by  Erwin  on Thu Feb 13 09:33 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.