Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2019 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

M46 questions 700

posted by  EgS60racer on  Sun Feb 16 11:46 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I need some dimensions from a 7 series people with m46's. You may have noticed that I'm working with John Parker on T5 adapters for 240's.

So heres what I need to know:
Are the bellhousing between the 7 and 2 series the same.
If so, then it's safe to assume the input shafts are the same length and pilot bearings

So, how do they get differen't shifter positions. It would be safe to assume that this is made up with different lengths in the linkage. So, could someone please give me an dimension from the back of the bellhousing to the where the shifter would sit in neutral (doesn't have to be exact). This would let us come up with a solution for 7 you series owners.

Thanks guys!

Doug
--
Sacramento VCOA President, (sacvolvo@hotmail.com) Admin @ clubvolvo.com 2001 S60 2.4t w/17' Amalthea & Premium package 82 242t 5spd (Offical Project Car!) w/ With more parts than I can list, 85 244ti~ Parts car






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New M46 questions [700]
posted by  EgS60racer  on Sun Feb 16 11:46 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.