Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Front Seal Carrier Gasket - Dry or With Sealant? 200 1981

posted by  DougC on  Mon Feb 17 15:24 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Aug 10 08:30 CST 2014
[RELATED]

81 242: Does the seal carrier for the front crank seal and intermediate shaft seal go back onto the block with a dry gasket? Or is RTV or Hylomar sealant used on this gasket? (A little of the sealant was suggested for the bottom of the carrier where it sits on the oil pan gasket.)
--
Thanks to everyone for the help, Doug C. 81 242 Brick On Blocks, stock; 86 240, 129K






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Front Seal Carrier Gasket - Dry or With Sealant? [200][1981]
posted by  DougC  on Mon Feb 17 15:24 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.