Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2007 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Intake Manifold Swap??? 200 1983

posted by  Choices on  Fri Feb 21 13:56 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Aug 16 10:32 CST 2013
[RELATED]

So why, you may ask, am I considering replacing the perfectly good intake manifold on my 83 245T with one from a B230FT?

My 83 is not intercooled, and I have a complete setup from an 85 244TI. The problem is that I don't want to loose the cruise control (sorry). The horizontal throttle cable spindle interferes with the hose from the intercooler to the manifold (it runs straight back along the left side of the bay). The stock 83 245T routes the output from the turbo across the valve cover. I don't think I have ever seen an 85 240TI with cruise. If so, is there an easier mod? If not, will the B230FT manifold fit my B21T? Thanks...

Jim Weiss
83 245T (waiting to inhale), 90 760TI, 93 940TI wagon, want more...






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Intake Manifold Swap??? [200][1983]
posted by  Choices  on Fri Feb 21 13:56 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.