Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2006 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Aftermarket stereo: questions about harness 700

Hi,

I ordered a CD player from Crutchfield for my 92 740. The old stereo was an AM/FM/Cassette.

The harness I recieved has 2 rectagular connectors. I soldered this harness to the one that came with the stereo. It's ready to go in.

When I removed the old radio, I found it was connected to the car via 1 rectangular block (which corresponds to one of the 2 blocks on the Crutchfield harness) and a round DIN connector (plus the antenna lead, of course). The Crutchfield instructions indicate that the second block on thier harness attaches to the preamp somewhere underneath the steering column.

My question is this: if I trace the DIN cable back, will I find it is attached to a corresponding rectangular block where I'm supposed to? Or do I need a different adaptor harness than the one I was supplied? I would like to know BEFORE I tear the lower dash apart, not after.

thanks in advance.

Thaddeus






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Aftermarket stereo: questions about harness [700]
posted by  Thaddeus subscriber  on Wed Feb 26 12:09 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.