Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2019 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Polyurethane torque rod bushings - Lubricate? 200

uid 2796's pic
posted by  bulletproof on  Sat Mar 22 13:51 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 12:02 CST 2014
[RELATED]

I've been searching the archives but I can find some info I remember seeing back a while.
What I am doing is replacing the torque rods in my '80 DL with the later style rods and polyurethane bushings. I recall some discussion of greasing the outside of the metal sleeve that carries the bolt to eliminate squeaks. Has anyone done this? Is it advisable? What sort of grease is used?
Or am I faulty in my recollection?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Polyurethane torque rod bushings - Lubricate? [200]
posted by  bulletproof subscriber  on Sat Mar 22 13:51 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.