Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2020 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Question about: Caster Alignment on volvo 240 Turbo 1983 200 1983

posted by  edmartz on  Sun Mar 30 14:14 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Jul 21 17:04 CST 2009
[RELATED]

Hi,
Yesturday I finish to replace the last component that my car need in the front suspension (rebuild), and Today I went to service shop, and they make the alignment, but I have a question about the Caster degree, the final report are:


LEFT
CAMBER : .50 deg.
CASTER: 1.39 deg.
Toe: 0.10"

RIGHT
CAMBER : 0.57 deg.
CASTER: 2.49 deg
Toe: 0.11"

But the mechanic said to get the correct caster, I must go to the Car Body repair shop, to get the right degree (2.00 - 3.00 deg.), Is this true, or what I can do to get the correct caster.


NOTE: Now my car pulls to the right side.

Does sombody have an idea to get this problem fixed?


Thanks,


Edwin





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Question about: Caster Alignment on volvo 240 Turbo 1983 [200][1983]
posted by  edmartz  on Sun Mar 30 14:14 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.