Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

R134a retrofit o-ring sizes 200 1989

posted by  greg_mustang on  Tue Apr 1 14:30 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat May 10 07:26 CST 2014
[RELATED]

I will be replacing the dryer, exp valve, o-rings, and cleaning out the compressor and condenser and adding the R134a compatible oil...

Dealer retro kit includes the evap but I am instructed from multiple sourcesthat I can do without if mine does not leak.

I would like to bye the parts from fcpgroton but don't know what o-rings I would need, since it is not a kit.

Can anyone advise as to the o-ring sizes for dryer and exp valve connections and any other ones needing replacment?

Thanks in advance,

Greg Mustang
greg_mustang@hotmail.com






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New R134a retrofit o-ring sizes [200][1989]
posted by  greg_mustang  on Tue Apr 1 14:30 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.